How to use air compressor to inflate tires – 9 simple steps

Choose the right Air compressor

Choose the right air compressor to inflate you is very important to choose the right one. There are different sizes of air compressors. Both can inflate the tires. But a good compressor will inflate your tires at the right pressure. Before knowing How to use air compressor to inflate tires , you must choose proper air compressor.

 Use proper Tools for tires

The first thing you need to do is make sure you have the right tools for your tires. If you don’t, you won’t be able to safely and efficiently fill your tires to the proper specifications. You will need several different tools.

Tire chuck

 It is a tool that enables the air compressor to attach to the tire’s valve stem. It also can be used when you need to replace the tire’s valve stem or when replacing all other tires. It is also known as a tire carrier, a valve stem remover.

How to use air compressor to inflate tires


The Regulator regulates the amount of air which is coming from the compressor. It makes it very much easier to reach the correct pounds per square inch (psi) of air in the tire. It is a very much important tools for your tires.

air compressor regulator

Pressure gauge

The gauge is an important tool for tire’s life. It measures the pressure of the tire and tells us how much air we should have in it. The gauge can tell us if there is enough air in our tires or not. it also helps in monitoring the tires’ condition. It is unthinkable to measure the pressure of a tire without a pressure gauge. So, the pressure gauge is very important for inflating the tires properly.

air compressor pressure gauge

Tire pressure

Find your tire’s recommended PSI in the owner’s manual. The correct pressure is very much important for your tire’s life and for your safety and for the car’s longevity. You must know how much air pressure must go into the tire. Typically, tires on sedans, mid-size SUVs, and smaller trucks aren’t very large and only need to be filled to a recommended pressure of around 32-36 pounds per square inch(PSI),  in each tire. And construction vehicles need at least 100 PSI, in each tire.

Air pressure is a critical factor in the safety of your car, so it’s important to know how much air the tires need to be inflated. A tire gauge can tell you how much air is in each tire so that you don’t fill them too high or too low and end up damaging them.

You need to put enough air into the tires, Or it can experience extra friction that raises the rubber’s temperature. Heat is generated and increased pressure builds up in them. In order to prevent this from happening, we need to make sure that we put enough air into our tires so that they can maintain their pressure at all times. If you fill much air into the tires, you can face the handling issues which may cause you to have an accident. Low or high tire pressure can cause you to run out of fuel.

When inflating the tires, try to do so when it is cold. The Cold temperatures can give you an exact accurate reading. Hot tires show higher air pressure when you use the tire gauge. If you get a flat tire while the car is running, wait about 30 minutes for the tire to cool down. If you can’t do it for any reasons, inflate the tires to 3 PSI over .

Get the tire ready

Each tire has a stem cap at the top of the valve stem. Don’t remove the cap until your compressor is ready to use. Make sure everything is fine.

start the air compressor

Most air compressors run on electrical power. Plug in the air compressor to let it accumulate with air. Small units have a two-prong plug, while medium and large compressors may need a three-prong plug. Make sure you are using outlets with the correct voltage for the air compressor. Running the air compressor on the wrong circuit can blow the compressor, circuit, or both. So, you must be careful about the correct voltage for the air compressor. When you turn on the compressor, you can hear the compressor motor sounds.

Correctly fill the tires

Use the tire chuck to attach the air compressor’s hose to the valve stem. Make sure the air hose is all okay and ready to use. Once everything is safe and secure, fill the tire slowly to put proper pressure into the tires. Remove the air hose from the air compressor, When you have the proper amount of air. You will hear a sibilating noise when you remove the hose from the compressor. Don’t worry as it is very much normal. At last, put the stem cap back on the valve.

correctly fill the tires

Power Cord And Hose Length

One more thing to think about is the length of your compressor’s power cord and air hose. The power cord should be long enough to allow for sufficient airflow and avoid overheating. The length of the hose should be long enough as well to prevent any damage due to overheating, especially if you are using it outdoors or in places where temperature fluctuates a lot. If you have made your decision and purchased your compressor, then you will have to make sure that it’s not too short or too long so that it doesn’t get damaged by overuse and overheating.

if you want to bring your tire to your compressor, you need to make sure that the hose is long enough. You will also want to be sure that the power cord is long enough and that it has the correct connector for your compressor.

Differences about inflating bike’s tire

Adaptor: You can use a tire chuck to fill most bike tires, but you may need a different adaptor for thinner tires.

pounds per square inch(psi): Thicker bike tires require less air pressure than thinner ones. Put the right amount of air in tire.

Digital Tire Pressure Gauge: You will also have to use a digital gauge for your motorcycle tires.

Filling speed: It is crucial to fill a bike tire slowly because it can explode if you overinflate it.

How to use the air compressor for tubeless bicycle tires

Read the owner’s manuals for your specific brand of compressor, but generally compressors have some features in common You’ll usually find an adjustable regulator to control the PSI output – adjust it to an appropriate PSI for bikes – you might begin with 40 PSI and then increase it if needed later. Higher PSI settings may be able to help seat stubborn tubeless tires.

Open the presta valve and hit it with the inflator tool. With a little luck, your tubeless tire beads will jump right into place with a satisfying “pop”, but if not, check this article for some additional steps to take.

In addition to seating tubeless tires at installation time, you can of course use a compressor for your daily “top-up” inflation needs. Some of the prestaflator inflation tools have a built-in pressure gauge you can use. If your inflator doesn’t have the pressure gauge, you can use the regulator on your compressor instead.

Check the tire pressure monthly

Check your tire pressure every month. Regularly checking your tire pressure is the best way to ensure your tires never dip far below the regular PSI. Proper tire pressure is very much important.

Check the tire regularly

check the tire if the tire is okay. Check if the tire valve is fine. It is very much important to check the tire valve regularly.


you have to check it carefully so that no power cords get wet with water . If it is needed, please wear safety glasses and gloves. And before starting check
the compressor properly. After all, safety is the key.

Other uses for air compressors

Once you’ve set up your compressor, you can easily remove the prestaflator Inflator using the quick-release I/M fitting to install other tools. Compressors can be used in many things, including:

1.quick cleanup of dust with a blower tip (a blower tip is included with the “starter kit” mentioned above)

2.inflating pool toys

3.inflating car tires

4.Filling paintball tanks

A compressor is quite noisy and can leak air slowly over time, which means the motor will turn on periodically to refill the tank. You’ll want to turn it on when you need it and then turn it off when you don’t. Be a good neighbor!

Let’s Watch a Video


In this section, we will cover some of the most common and even uncommon questions about inflating tires and compressors.

what are the overinflated tire problems?

There is a lot of debate on how to deal with tire blowouts. Some people advocate inflating the tires and others say that they should not be inflated at all.

The issue is that tire blowouts is very dangerous for the vehicle driver and passengers, especially if the tire is overinflated. Inflating your tires can increase their pressure, which in turn increases their risk of explosion or bursting into flames.

Overinflated tires are more susceptible to damage from road hazards such as potholes, cracks, and curbs. They can be damaged in a number of ways.

How to Fix an Overinflated Tire

  1. Locate the tire that has an overinflated air pressure and locate the valve stem. It looks like a little black cap extending from the wheel. Twist the cap off to the left to expose the metal pin inside.
  2. Check your tire pressure with an air pressure gauge and take note. This will give you a proper idea of were you will need to adjust to.

3.To release some of the air from the tire, use the back end of the needle to push the metal pin in its center down. Do this in bursts and check your remaining pressure frequently.

 Final Thoughts

You are done! That’s really an easy DIY to inflate your car tires with an air compressor. From now ‘How to use air compressor to inflate tires?’ isn’t a big question for you .Follow all of the instructions carefully, practice ‘safety first’ since you are working with electricity.

4 thoughts on “How to use air compressor to inflate tires – 9 simple steps”

Leave a Comment

Show Buttons
Hide Buttons